 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FIN1017 3.3V LVDS 1-Bit High Speed Differential Driver April 2001 Revised April 2002 FIN1017 3.3V LVDS 1-Bit High Speed Differential Driver General Description This single driver is designed for high speed interconnects utilizing Low Voltage Differential Signaling (LVDS) technology. The driver translates LVTTL signal levels to LVDS levels with a typical differential output swing of 350 mV which provides low EMI at ultra low power dissipation even at high frequencies. This device is ideal for high speed transfer of clock or data. The FIN1017 can be paired with its companion receiver, the FIN1018, or with any other LVDS receiver. Features s Greater than 600Mbs data rate s 3.3V power supply operation s 0.5ns maximum differential pulse skew s 1.5ns maximum propagation delay s Low power dissipation s Power-Off protection s Meets or exceeds the TIA/EIA-644 LVDS standard s Flow-through pinout simplifies PCB layout s 8-Lead SOIC and US8 packages save space Ordering Code: Order Number FIN1017M FIN1017MX FIN1017K8X Package Number M08A M08A MAB08A Package Description 8-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow [TUBE] 8-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow [TAPE and REEL] 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide [TAPE and REEL] Connection Diagrams 8-Lead SOIC Pin Assignment for US-8 Package Note: Ground pins 4 and 5 for optimum operation. TOP VIEW Pin Descriptions Pin Name DIN DOUT+ DOUT- VCC GND NC Description LVTTL Data Input Non-inverting Driver Output Inverting Driver Output Power Supply Ground No Connect Function Table Input DIN L H OPEN H = HIGH Logic Level Outputs DOUT+ L H L L = LOW Logic Level DOUT- H L H X = Don't Care (c) 2002 Fairchild Semiconductor Corporation DS500500 www.fairchildsemi.com FIN1017 Absolute Maximum Ratings(Note 1) Supply Voltage (VCC) DC Input Voltage (DIN) DC Output Voltage (DOUT) Driver Short Circuit Current (IOSD) Storage Temperature Range (TSTG) Max Junction Temperature (TJ) Lead Temperature (TL) (Soldering, 10 seconds) ESD (Human Body Model) ESD (Bus Pins DOUT+/DOUT- to GND) ESD (Machine Model) 260C -0.5V to +4.6V -0.5V to +6V -0.5V to +4.7V Continuous Recommended Operating Conditions Supply Voltage (VCC) Input Voltage (VIN) Operating Temperature (TA) 3.0V to 3.6V 0 to VCC -40C to +85C -65C to +150C 150C 6500V 10500V 350V Note 1: The "Absolute Maximum Ratings": are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature and output/input loading variables. Fairchild does not recommend operation of circuits outside databook specification. DC Electrical Characteristics Over supply voltage and operating temperature ranges, unless otherwise specified Symbol VOD VOD VOS VOS IOFF IOS VIH VIL IIN II(OFF) VIK ICC CIN COUT Parameter Output Differential Voltage VOD Magnitude Change from Differential LOW-to-HIGH Offset Voltage Offset Magnitude Change from Differential LOW-to-HIGH Power-Off Output Current Short Circuit Output Current Input HIGH Voltage Input LOW Voltage Input Current Power-Off Input Current Input Clamp Voltage Power Supply Current Input Capacitance Output Capacitance VIN = 0V or VCC VCC = 0V, VIN = 0V or 3.6V IIK = -18 mA No Load, VIN = 0V or VCC RL = 100 , VIN = 0V or VCC 4 6 -1.5 8 10 VCC = 0V, VOUT = 0V or 3.6V VOUT = 0V VOD = 0V 2.0 GND RL = 100 , See Figure 1 1.125 1.25 Test Conditions Min 250 Typ (Note 2) 350 450 25 1.375 25 20 -8 8 VCC 0.8 20 20 Max Units mV mV V mV A mA V V A A V mA mA pF pF Note 2: All typical values are at TA = 25C and with VCC = 3.3V. AC Electrical Characteristics Over supply voltage and operating temperature ranges, unless otherwise specified Symbol tPLHD tPHLD tTLHD tTHLD tSK(P) tSK(PP) Parameter Differential Propagation Delay LOW-to-HIGH Differential Propagation Delay HIGH-to-LOW Differential Output Fall Time (80% to 20%) Pulse Skew |tPLH - tPHL| Part-to-Part Skew (Note 4) RL = 100 , CL = 10pF, Differential Output Rise Time (20% to 80%) See Figure 2 and Figure 3 Test Conditions Min Typ (Note 3) 0.5 0.5 0.4 0.4 1.5 1.5 1.0 1.0 0.5 1.0 Max Units ns ns ns ns ns ns Note 3: All typical values are at TA = 25C and with VCC = 3.3V. Note 4: tSK(PP) is the magnitude of the difference in propagation delay times between any specified terminals of two devices switching in the same direction (either LOW-to-HIGH or HIGH-to-LOW) when both devices operate with the same supply voltage, same temperature, and have identical test circuits. www.fairchildsemi.com 2 FIN1017 Note A: All input pulses have frequency = 10 MHz, tR or tF = 2 ns Note B: CL includes all probe and fixture capacitances FIGURE 1. Differential Driver DC Test Circuit FIGURE 2. Differential Driver Propagation Delay and Transition Time Test Circuit FIGURE 3. AC Waveforms 3 www.fairchildsemi.com FIN1017 DC / AC Typical Performance Curves FIGURE 4. Output High Voltage vs. Power Supply Voltage FIGURE 5. Output Low Voltage vs. Power Supply Voltage FIGURE 6. Output Short Circuit Current vs. Power Supply Voltage FIGURE 7. Differential Output Voltage vs. Power Supply Voltage FIGURE 8. Differential Output Voltage vs. Load Resistor FIGURE 9. Offset Voltage vs. Power Supply Voltage www.fairchildsemi.com 4 FIN1017 DC / AC Typical Performance Curves (Continued) FIGURE 10. Power Supply Current vs. Frequency FIGURE 11. Power Supply Current vs. Power Supply Voltage FIGURE 12. Power Supply Current vs. Ambient Temperature FIGURE 13. Differential Propagation Delay vs. Power Supply FIGURE 14. Differential Propagation Delay vs. Ambient Temperature FIGURE 15. Differential Pulse Skew (tPLH - tPHL) vs. Power Supply Voltage 5 www.fairchildsemi.com FIN1017 DC / AC Typical Performance Curves (Continued) FIGURE 16. Differential Pulse Skew (tPLH - tPHL) vs. Ambient Temperature FIGURE 17. Transition Time vs. Power Supply Voltage FIGURE 18. Transition Time vs. Ambient Temperature www.fairchildsemi.com 6 FIN1017 Physical Dimensions inches (millimeters) unless otherwise noted 8-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M08A 7 www.fairchildsemi.com FIN1017 3.3V LVDS 1-Bit High Speed Differential Driver Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide Package Number MAB08A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 8 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com |
Price & Availability of FIN1017
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |